研究業績【論文・2001】
論文・2001
- T. Naka, G. Torikai, R. Hino and F. Yoshlda: The effects of temperature and forming speed on the forming limit diagram for type 5083 aluminum-magnesium alloy sheet, J. Materials Processing Technology, 113 (2001), pp.648-653.
- M. Takiguchi and F. Yoshida: Plastic bending of adhesive-bonded sheet metals, J. Materials Processing Technology, 113 (2001), pp.19-23.
- 京極秀樹, 反保豊明, 小松眞一郎, 渡辺暢, 吉田総仁, 佐久間俊雄, 岩田宇一: 放電焼結法により作製したTiNi系形状記憶合金の熱・カ学特性, 日本機械学会論文集A編, 67-662 (2001.10), pp.1667-1674.
- 坂元康泰, 吉田総仁: 剛性, 強度および重量を考慮した構造形状決定法, 日本機械学会論文集A編, 67-660 (2001.8), pp.1305-1311.
- 瀧口三千弘, 吉田総仁: 接着接合したアルミニウム合金板の塑性曲げにおける変形特性と剥離強度, 日本機械学会論文集A編, 67-655 (2001.3), pp.226-223.
- 上森武, 藤原賢司, 岡田達夫, 吉田総仁: 軟鋼板の大ひずみ繰返し塑性変形挙動とその構成モデル, 塑性と加工, 42-480 (2001.1), pp.64-69.
- F. Yoshida, T. Uemori, H.-B. Sun and M. Itoh: Plasticity models describing the Bauschinger effect and yield-point phenomena, Inzynieria Materialowa, 112-5 (2001), pp.974-980.
- M. Kohzu, F. Yoshida, H. Somekawa, M. Yoshikawa S. Tanabe and K. Higashi: Fracture mechanism and forming limit in deep-drawing of magnesium alloy AZ31, Materials Transaction, 42-7 (2001), 1273-1276.
- Xin Ma, Yiyu Qian and F. Yoshida: Relative damage stress and its application in the case of temperature cycling load, Progress in Natural Science, 11-2 (2001), pp.156-160.
- Xin Ma, Yiyu Qian and F. Yoshida: Effect of La on the Sn-rich halo formation in Sn60-Pb40 alloy, Journal of Alloys and Compounds, 327 (2001), pp.263-266.
- Xin Ma, Yiyu Qian, Hongyuan Fang and F. Yoshida: Dominant mechanical factor for the failure of solder joints under temperature cycling, Journal of Materials Science and Technology, 17-1 (2001), 193-194.
- Xin Ma, Yiyu Qian and F. Yoshida: Finite element simulation of mechanical response of solder joints in surface mount package under different temperature cycling profile, Trans. Nonferrous Metals Society of China, 11-4 (2001), pp.471-474.
- Xie Songbai, Xin Ma, Yi-yu Qian and Fusahito Yoshida: Thermodynamic assessment of the interaction relation between La and constituent elements in Sn-Pb alloy, J. Rare Earths, 19-2 (2001), pp.107-109.
- T. Watanabe, H. Kyogoku, F. Yoshida and T. Sakuma: Fabrication of TiNi Shape Memory Alloy by Spark-Plasma Sintering and Its Thermo-Mechanical Properties, Trans. Materials Research Soc. Japan, Vol.26, No.1, (2001), pp.149-152.